20110411
After-Action Report: Gunsite's "Battle Rifle" Class
OK, folks, long post here. Thought I'd jot down a few (hundred?) thoughts about the Gunsite "Battle Rifle" class I attended last week.
Background
I've been slinging around these things called "battle rifles" for a decade or so now. I bounced around the spectrum of them -- FALs, HKs/PTRs, M1As, M1 Garands -- and finally settled on the M1As. (Don't worry, I kept the Garands...) I've been shooting the local CMP matches with the M1As for about five years and doing . . . . . OK. (High score so far: 465-10X) I also shoot 3-Gun matches with the M1As, running in the "Heavy Metal" -- aka, "He-Man Irons" -- division. Again, I do OK, albeit slowly. Last year I scored a Rifleman patch from the Appleseed folks using my iron-sighted LRB. So, needless to say, I can hit with an M1A.
But one thing I'm not with an M1A is fast -- and the thought of having to use iron sights in an "expedient fashion" always gave me the wiggins. So I decided to attend Gunsite's "Battle Rifle" course with an iron-sighted M1A with the hopes of remedying that.
This was to be my fourth trip to Gunsite, having taken Pistol 250, Arizona CCW, and Carbine 223 previously. I'd been warned by an attendee of the inaugural Battle Rifle class that it was heavily derived from Carbine 223 and that there'd be overlap. That didn't phase me. Carbine 223 helped me get a lot faster with that platform; I expected the same from Battle Rifle.
I was not to be disappointed.
The Curriculum
The class is one of Gunsite's 5-day "total immersion" affairs. The schedule was roughly (and with some probable ordering/sequence errors on my part):
Day 1:
Introduction, safety briefing, syllabus, and rifle fundamentals
Sight alignment and trigger control
Natural Point of Aim
Zeroing at 100 yards and 200 yards
Shooting positions
Day 2:
Introduction to the "school drills"
Ballistics
School drills
Tactical reloads and ammo management
Day 3:
School drills
Speed reloads
Movement and turns
Shooting from cover
Transitions to a sidearm
Non-standard response (moving beyond "two to the body, one to the head")
300-yard shooting
Day 4:
School drills, school drills, and more school drills, with time pressure
El Presidente
Moving targets
House clearing
Field courses: walking and running
Night shoot
Day 5:
400-yard shooting
School drills, school drills, and more school drills, with time pressure
El Presidente
School drill, El Prez "final exam"
Shoot-off
Graduation
Each day began with a quick confirmation of our 200-yard zeroes.
The school drills were:
One shot to the head @ 25 yards in 2 seconds, off-hand, starting from low-ready
Two shots to center-of-mass (COM) @ 50 yards in 4 seconds, off-hand, starting from low-ready
Two shots to COM @ 100 yards in 13 seconds, dropping to kneeling/squatting from low-ready
Two shots to COM @ 100 yards in 13 seconds, dropping to sitting from low-ready
Two shots to COM @ 200 yards in 15 seconds, dropping to prone from low-ready
Depending on your experience level, those times may seem too fast or too slow. For me, running irons, they were just barely long enough, with the targets typically turning away just as I was recovering my sight picture from the final shot.
The El Presidente was:
One shot to COM on each of three targets @ 25 yards, off-hand, starting from low ready, followed by
A speed reload, followed by
One shot to COM on each of three targets @ 25 yards
The goal was 10 seconds. My best time was 11 seconds.
Results
Well, I can say one thing for sure: I'm a lot faster now! Gunsite is all about repetition and establishing muscle memory. We performed the school drills until I couldn't stand it anymore. While it was difficult to do them quickly with iron sights, by the end of the week, I was doing them in half the time I was at the start of the week. We were taught a very clever trick to perform a speed reload on the M1As and the FALs. (Basically, lever-out the empty mag using the full mag that'll replace it...) On a full-sized Pepper Popper, I was able to make 90% of my hits at 300 yards and 2/3rds of them at 400 yards. And, yes, that little range knob on the left-hand side of the M1A's rear sight really does work! Me and my M1A -- dubbed "Mindy" (aka, "Hit Girl") -- gelled into quite a team.
On the final day, we did a "rotating" shoot-off with all of the students in the class, shooting from indoor ready against a 100-yard Popper (off-hand) and a 200-yard falling plate (prone), with a movement of firing positions in between. I was the only student in the class with iron sights and I had to haul-ass to keep up. I won 6 of the 8 initial pairings, putting me in a three-way tie for first place. Unfortunately, I was eliminated in the first round of the final shoot-off and had to be content with 3rd place, not that I was upset about that. I was congratulated by my fellow classmates, all of them impressed that I was keeping up with iron sights. Upon graduation, I received a grade of "Marksman I", the Gunsite the equivalent of a "B".
And, man, was I exhausted!
Equipment
Rifle: Springfield Armory M1A Standard, green composite stock, iron sights
Ammunition: German DAG mil-surp
Sidearm: Springfield Armory Mil-Spec 1911 (not the GI model)
Rifle Mags: CMI 20-rnd mags (I brought 35 of them)
Rifle Sling: Specter Gear "Two-Point Tactical" for the M1A
Tac Vest: an old Blackhawk MOLLE
Mag Pouches: three Tactical Tailor single-mag pouches, attached to the vest
Sidearm Holster: Blackhawk "generic" drop-leg
Hearing protection: ear plugs and Peltor electronic muffs (LOUD! I was double-protected all week...)
Problems and Equipment Failures
Ammunition: The M1A started giving me problems on the morning of the second day, not going completely into battery on random occasions. Typically, the bolt would "lock-in" when the hammer dropped but it wouldn't fire the round. (And that's a Good Thing...) This happened independent of the number of rounds in the magazine, so they weren't suspect. The first diagnosis was too much lube, but that wasn't it. I replaced the recoil spring. That wasn't it either. We had the opportunity to chronograph our ammunition and the DAG was clocking-in at measly 2650 fps. That didn't seem right and a quick call back home to the wife confirmed it. She scoured my range notes and found that my "normal" ammo -- Aussie mil-surp -- was pushing 2800 fps. I should have caught this anyway since the ejected DAG cases were barely landing forward of the muzzle when shot from prone. So, the DAG was underpowered and I knew what to do: cleanliness is next to godliness! I performed a full cleaning of the M1A every night and again during lunch, and used grease only in the op-rod's roller channel. Break Free went everywhere else. The failures-to-go-into-battery (FTBs?) all but disappeared after that. (I could usually tell when it was getting close to lunchtime or the end of the day simply by the one or two FTBs I'd start to get...) I'll be using my remaining DAG for matches and save my (more reliable) Aussie for the zombies!
That said, the DAG ammo is *very* accurate, more so than the Aussie. And there were no duds.
Rifle: None, not even after 1050 rounds in 5 days! (Total round count on this M1A is now very close to 2000...) The composite stock sure took a beating, though, and I'm glad I didn't put one of my nice wooden stocks thru this torture. I had to keep tabs on the screw holding the rear sight's elevation knob. It had a tendency to back out. Lok-Tite is the cure, I suspect.
Mags: Nada. Not a single malf could be traced to the CMIs. I had a handful of those Korean mags and they worked fine, too.
Notes and Misc
Number of students in the class: 7
Age range of students: mostly 40-somethings, with a 30- and a couple 50-somethings thrown into the mix.
Number of instructors: 3 the first two days, then 2 thereafter
Knowledge level of the instuctors: on a scale of 1 to 10, an 11.
Patience level of the instructors: (see 'Knowledge').
Rifles: 3 FALs, 3 M1As, 1 AR-10. One of the M1As was a back-up to an AR-10 that was back-up to an AR-10. (Follow that?) At one point or another, all three AR-10s went Tango-Uniform, two of them down for the full ten-count. Not cool. Everyone -- except Yours Truly -- ran an optic of one flavor or another. Aimpoints and ACOGs were the norm. Both of the other M1As were "Scout Squad" models.
Ammo consumption: 1050 rounds.
Fitness: This is not a course for someone that's out of shape. I've been lifting weights 1x or 2x per week for the last three years and I'd really wished I'd done more. Gunsite teaches reloading "up in your workspace" and holding the M1A in front of my face with only my stong-hand for countless tactical reloads had me plum tuckered out! Workouts should emphasize biceps, shoulders, and lower back. Do your stretches, too. It'll help a lot while getting back to your feet from position. In preparation for the class, I'd lost 25 pounds since October. I was grateful for my sub-200 lb weight, especially when dropping into prone!
Lights: The night shoot involves using hand-held and/or weapon-mounted lights. Not wanting to mount anything to the M1A, I'd brought a 205-lumen Fenix light (AA batteries) only to discover that, unlike Surefires, the switch doesn't activate the light until it's released. Grrrr... Nice light, but not "tactical". Lesson learned.
Transitions: Switching between my M1A (with its two-stage trigger) and my 1911 (with what is effectively a single-stage trigger) had me all over the target with the sidearm. It was rather embarrassing, actually. Perhaps my XDM is a better companion to my M1A than the 1911. (Yes, I know: heresy.)
The assistant instructor had one of the new "heavy" (7.62x51) SCARs. All I can say is, "Interesting...."
So, tha-tha-that's all folks -- thanx for hangin' in there through all that verbiage! I loved the class, even though it took a lot out of me. And I certainly don't fear the irons any more! Hope this helps anyone else considering the class.
Ciao!
TCM
(who earns a living from neither Gunsite nor Springfield Armory...)
Background
I've been slinging around these things called "battle rifles" for a decade or so now. I bounced around the spectrum of them -- FALs, HKs/PTRs, M1As, M1 Garands -- and finally settled on the M1As. (Don't worry, I kept the Garands...) I've been shooting the local CMP matches with the M1As for about five years and doing . . . . . OK. (High score so far: 465-10X) I also shoot 3-Gun matches with the M1As, running in the "Heavy Metal" -- aka, "He-Man Irons" -- division. Again, I do OK, albeit slowly. Last year I scored a Rifleman patch from the Appleseed folks using my iron-sighted LRB. So, needless to say, I can hit with an M1A.
But one thing I'm not with an M1A is fast -- and the thought of having to use iron sights in an "expedient fashion" always gave me the wiggins. So I decided to attend Gunsite's "Battle Rifle" course with an iron-sighted M1A with the hopes of remedying that.
This was to be my fourth trip to Gunsite, having taken Pistol 250, Arizona CCW, and Carbine 223 previously. I'd been warned by an attendee of the inaugural Battle Rifle class that it was heavily derived from Carbine 223 and that there'd be overlap. That didn't phase me. Carbine 223 helped me get a lot faster with that platform; I expected the same from Battle Rifle.
I was not to be disappointed.
The Curriculum
The class is one of Gunsite's 5-day "total immersion" affairs. The schedule was roughly (and with some probable ordering/sequence errors on my part):
Day 1:
Introduction, safety briefing, syllabus, and rifle fundamentals
Sight alignment and trigger control
Natural Point of Aim
Zeroing at 100 yards and 200 yards
Shooting positions
Day 2:
Introduction to the "school drills"
Ballistics
School drills
Tactical reloads and ammo management
Day 3:
School drills
Speed reloads
Movement and turns
Shooting from cover
Transitions to a sidearm
Non-standard response (moving beyond "two to the body, one to the head")
300-yard shooting
Day 4:
School drills, school drills, and more school drills, with time pressure
El Presidente
Moving targets
House clearing
Field courses: walking and running
Night shoot
Day 5:
400-yard shooting
School drills, school drills, and more school drills, with time pressure
El Presidente
School drill, El Prez "final exam"
Shoot-off
Graduation
Each day began with a quick confirmation of our 200-yard zeroes.
The school drills were:
One shot to the head @ 25 yards in 2 seconds, off-hand, starting from low-ready
Two shots to center-of-mass (COM) @ 50 yards in 4 seconds, off-hand, starting from low-ready
Two shots to COM @ 100 yards in 13 seconds, dropping to kneeling/squatting from low-ready
Two shots to COM @ 100 yards in 13 seconds, dropping to sitting from low-ready
Two shots to COM @ 200 yards in 15 seconds, dropping to prone from low-ready
Depending on your experience level, those times may seem too fast or too slow. For me, running irons, they were just barely long enough, with the targets typically turning away just as I was recovering my sight picture from the final shot.
The El Presidente was:
One shot to COM on each of three targets @ 25 yards, off-hand, starting from low ready, followed by
A speed reload, followed by
One shot to COM on each of three targets @ 25 yards
The goal was 10 seconds. My best time was 11 seconds.
Results
Well, I can say one thing for sure: I'm a lot faster now! Gunsite is all about repetition and establishing muscle memory. We performed the school drills until I couldn't stand it anymore. While it was difficult to do them quickly with iron sights, by the end of the week, I was doing them in half the time I was at the start of the week. We were taught a very clever trick to perform a speed reload on the M1As and the FALs. (Basically, lever-out the empty mag using the full mag that'll replace it...) On a full-sized Pepper Popper, I was able to make 90% of my hits at 300 yards and 2/3rds of them at 400 yards. And, yes, that little range knob on the left-hand side of the M1A's rear sight really does work! Me and my M1A -- dubbed "Mindy" (aka, "Hit Girl") -- gelled into quite a team.
On the final day, we did a "rotating" shoot-off with all of the students in the class, shooting from indoor ready against a 100-yard Popper (off-hand) and a 200-yard falling plate (prone), with a movement of firing positions in between. I was the only student in the class with iron sights and I had to haul-ass to keep up. I won 6 of the 8 initial pairings, putting me in a three-way tie for first place. Unfortunately, I was eliminated in the first round of the final shoot-off and had to be content with 3rd place, not that I was upset about that. I was congratulated by my fellow classmates, all of them impressed that I was keeping up with iron sights. Upon graduation, I received a grade of "Marksman I", the Gunsite the equivalent of a "B".
And, man, was I exhausted!
Equipment
Rifle: Springfield Armory M1A Standard, green composite stock, iron sights
Ammunition: German DAG mil-surp
Sidearm: Springfield Armory Mil-Spec 1911 (not the GI model)
Rifle Mags: CMI 20-rnd mags (I brought 35 of them)
Rifle Sling: Specter Gear "Two-Point Tactical" for the M1A
Tac Vest: an old Blackhawk MOLLE
Mag Pouches: three Tactical Tailor single-mag pouches, attached to the vest
Sidearm Holster: Blackhawk "generic" drop-leg
Hearing protection: ear plugs and Peltor electronic muffs (LOUD! I was double-protected all week...)
Problems and Equipment Failures
Ammunition: The M1A started giving me problems on the morning of the second day, not going completely into battery on random occasions. Typically, the bolt would "lock-in" when the hammer dropped but it wouldn't fire the round. (And that's a Good Thing...) This happened independent of the number of rounds in the magazine, so they weren't suspect. The first diagnosis was too much lube, but that wasn't it. I replaced the recoil spring. That wasn't it either. We had the opportunity to chronograph our ammunition and the DAG was clocking-in at measly 2650 fps. That didn't seem right and a quick call back home to the wife confirmed it. She scoured my range notes and found that my "normal" ammo -- Aussie mil-surp -- was pushing 2800 fps. I should have caught this anyway since the ejected DAG cases were barely landing forward of the muzzle when shot from prone. So, the DAG was underpowered and I knew what to do: cleanliness is next to godliness! I performed a full cleaning of the M1A every night and again during lunch, and used grease only in the op-rod's roller channel. Break Free went everywhere else. The failures-to-go-into-battery (FTBs?) all but disappeared after that. (I could usually tell when it was getting close to lunchtime or the end of the day simply by the one or two FTBs I'd start to get...) I'll be using my remaining DAG for matches and save my (more reliable) Aussie for the zombies!
That said, the DAG ammo is *very* accurate, more so than the Aussie. And there were no duds.
Rifle: None, not even after 1050 rounds in 5 days! (Total round count on this M1A is now very close to 2000...) The composite stock sure took a beating, though, and I'm glad I didn't put one of my nice wooden stocks thru this torture. I had to keep tabs on the screw holding the rear sight's elevation knob. It had a tendency to back out. Lok-Tite is the cure, I suspect.
Mags: Nada. Not a single malf could be traced to the CMIs. I had a handful of those Korean mags and they worked fine, too.
Notes and Misc
Number of students in the class: 7
Age range of students: mostly 40-somethings, with a 30- and a couple 50-somethings thrown into the mix.
Number of instructors: 3 the first two days, then 2 thereafter
Knowledge level of the instuctors: on a scale of 1 to 10, an 11.
Patience level of the instructors: (see 'Knowledge').
Rifles: 3 FALs, 3 M1As, 1 AR-10. One of the M1As was a back-up to an AR-10 that was back-up to an AR-10. (Follow that?) At one point or another, all three AR-10s went Tango-Uniform, two of them down for the full ten-count. Not cool. Everyone -- except Yours Truly -- ran an optic of one flavor or another. Aimpoints and ACOGs were the norm. Both of the other M1As were "Scout Squad" models.
Ammo consumption: 1050 rounds.
Fitness: This is not a course for someone that's out of shape. I've been lifting weights 1x or 2x per week for the last three years and I'd really wished I'd done more. Gunsite teaches reloading "up in your workspace" and holding the M1A in front of my face with only my stong-hand for countless tactical reloads had me plum tuckered out! Workouts should emphasize biceps, shoulders, and lower back. Do your stretches, too. It'll help a lot while getting back to your feet from position. In preparation for the class, I'd lost 25 pounds since October. I was grateful for my sub-200 lb weight, especially when dropping into prone!
Lights: The night shoot involves using hand-held and/or weapon-mounted lights. Not wanting to mount anything to the M1A, I'd brought a 205-lumen Fenix light (AA batteries) only to discover that, unlike Surefires, the switch doesn't activate the light until it's released. Grrrr... Nice light, but not "tactical". Lesson learned.
Transitions: Switching between my M1A (with its two-stage trigger) and my 1911 (with what is effectively a single-stage trigger) had me all over the target with the sidearm. It was rather embarrassing, actually. Perhaps my XDM is a better companion to my M1A than the 1911. (Yes, I know: heresy.)
The assistant instructor had one of the new "heavy" (7.62x51) SCARs. All I can say is, "Interesting...."
So, tha-tha-that's all folks -- thanx for hangin' in there through all that verbiage! I loved the class, even though it took a lot out of me. And I certainly don't fear the irons any more! Hope this helps anyone else considering the class.
Ciao!
TCM
(who earns a living from neither Gunsite nor Springfield Armory...)
20110327
QFTD
Airports today are what a certain group of statists want to turn the entire U.S.A. into if they get a chance. These bastards have not captured a single terrorist, or stopped a single terrorist attack. American citizens have done that . . .
This is not America, at least not the America I want to live in.
WTQ
20110320
Remember when a State government was this big? Me neither
A plaque is set in the grounds in Tuscaloosa, where Alabama's former State Capitol once stood. The plaque shows the floor plan. This is the second floor with the House at one end and the Senate at the other.
The Governor, several of his Secretaries, and the Supreme Court shared the first floor.
In its time it must have been an opulent building, one that inspired pride in all Alabamians. Damn, even far-flung Wyoming's government has spread into many more buildings than this.
20110219
Do you know what time it is?
NRA BOD ballots arrived in the American Rifleman.
Any suggestions on voting for true friends of Liberty?
Any suggestions on voting for true friends of Liberty?
20110202
Dancing in blood is, well, what They do
Matthew Vadum reports in WashTimes:
Of course there is a suggestion that these threats come from Tea Partiers or other friends of Liberty. Rubbish.
From what we have seen of the attempt on Representative Giffords's life, Piven's movement---not ours---is ready and willing to take advantage of martyrs.
Why would we wish to give one to them? Let The Nation look among its own for the source of threats against her.
I, for one, truly wish Frances Fox Piven a long, long life wherein she sees her philosophy abandoned, her beliefs discredited, and her health preserved by doctors taking their payment in cash.
Shocked staffers at the Nation report that the publication’s website has been flooded with angry comments, expletives and unprintable threats against Ms. Piven's person.
Of course there is a suggestion that these threats come from Tea Partiers or other friends of Liberty. Rubbish.
From what we have seen of the attempt on Representative Giffords's life, Piven's movement---not ours---is ready and willing to take advantage of martyrs.
Why would we wish to give one to them? Let The Nation look among its own for the source of threats against her.
I, for one, truly wish Frances Fox Piven a long, long life wherein she sees her philosophy abandoned, her beliefs discredited, and her health preserved by doctors taking their payment in cash.
20110128
goings on in the Middle East
. . . prompt talk of an 'internet revolution.' Apparently an internet revolution won't work, or hasn't yet worked in Egypt, because the internet can be seized by the thugs who'd be displaced by the revolution.
So maybe there needs to be development of a revolutionary internet. Hinted at here.
Small, low power, short-range digital radios that relay a short packet one to another. Make them small enough, and cheap enough, that they can be stuck quietly to motor vehicles, even those of the thugs, so they circulate. Each radio repeats a message until another radio gets it.
If enough of them are in close proximity, they can either speed up bandwidth to relay files (photos, for example), or dice up transmission timeslots smaller so more stations can participate. Or both.
Allowing a huge number of hops is acceptable.
The thugs would spend valuable time finding or jamming enough radios to impair the network, while you're deploying more.
For those of us outside the isolated country, we can smuggle or airdrop more of them in. Hell, fasten them to migratory waterfowl. This is something we could already have done for our liberty-minded friends in Egypt.
It's not the internet you grew up with. It won't be internet protocol at all, in fact. But it beats being deaf and blind.
So maybe there needs to be development of a revolutionary internet. Hinted at here.
Small, low power, short-range digital radios that relay a short packet one to another. Make them small enough, and cheap enough, that they can be stuck quietly to motor vehicles, even those of the thugs, so they circulate. Each radio repeats a message until another radio gets it.
If enough of them are in close proximity, they can either speed up bandwidth to relay files (photos, for example), or dice up transmission timeslots smaller so more stations can participate. Or both.
Allowing a huge number of hops is acceptable.
The thugs would spend valuable time finding or jamming enough radios to impair the network, while you're deploying more.
For those of us outside the isolated country, we can smuggle or airdrop more of them in. Hell, fasten them to migratory waterfowl. This is something we could already have done for our liberty-minded friends in Egypt.
It's not the internet you grew up with. It won't be internet protocol at all, in fact. But it beats being deaf and blind.
20110122
recreational Facebooking, and more
We do maintain a Facebook account, connected to our real-world identity. Recently, it has provided me some amusement in the form of interacting with the metrosexual people I knew in my teen years.
They spasm at the very mention of Sarah Palin. So I defend her often, by linking to or 'liking' the articles that refute her post-Loughner accusers.
It makes them only more deranged. I giggle.
But then I remember it isn't funny. An innocent person is accused of fomenting hatred and inciting violence. A mentally-ill man is ignored by his local elected peace officer, and his sworn deputies, who could have initiated court proceedings against him. He could have received treatment; at the very least, he could have been kept away from firearms.
No, it isn't funny. And it isn't about a former governor of Alaska either. Nor about talk radio.
I take some comfort from the observations that the psychotic's target, a legislator, lives and struggles to recover; the sheriff, whose badge clots with the blood of the psychotic's victims, may answer for his failures by facing a recall; the nation seems to reject idiotic calls to punish the weapon. Some comfort, not much.
I also think of the torture that the shooter must have felt, years ago, as he sensed that his grasp of the world was failing. The greater torture of realizing that people around him notice that he has changed, but have done little or nothing to help him. What of the abandonment, the isolation, as friends, classmates, employers, even family gave up on him?
They spasm at the very mention of Sarah Palin. So I defend her often, by linking to or 'liking' the articles that refute her post-Loughner accusers.
It makes them only more deranged. I giggle.
But then I remember it isn't funny. An innocent person is accused of fomenting hatred and inciting violence. A mentally-ill man is ignored by his local elected peace officer, and his sworn deputies, who could have initiated court proceedings against him. He could have received treatment; at the very least, he could have been kept away from firearms.
No, it isn't funny. And it isn't about a former governor of Alaska either. Nor about talk radio.
I take some comfort from the observations that the psychotic's target, a legislator, lives and struggles to recover; the sheriff, whose badge clots with the blood of the psychotic's victims, may answer for his failures by facing a recall; the nation seems to reject idiotic calls to punish the weapon. Some comfort, not much.
I also think of the torture that the shooter must have felt, years ago, as he sensed that his grasp of the world was failing. The greater torture of realizing that people around him notice that he has changed, but have done little or nothing to help him. What of the abandonment, the isolation, as friends, classmates, employers, even family gave up on him?
20101130
Bacchus nails
When you catch me doing journalist-like things, it’s because the lazy fuckers who claim to be journalists aren’t doing their fucking jobs.
Over here.
20101119
My National Ammo Day Haul
Fuze asks and Fuze gets.

200 rnds 9mm, 115-grn FMJ
50 rnds 22 Mag, 40-grn HP
50 rnds 38 Special +P, 125-grn HPs
(The latter are for Barbaloot to test in a couple of .357 Ruger revolvers real soon like...)
All of it picked up from Sportsman's Warehouse on the way home from work. I'd forgotten about NAD until I read Fuze's post.
So mark me down for 300 rounds. I did my part!!
TCM
200 rnds 9mm, 115-grn FMJ
50 rnds 22 Mag, 40-grn HP
50 rnds 38 Special +P, 125-grn HPs
(The latter are for Barbaloot to test in a couple of .357 Ruger revolvers real soon like...)
All of it picked up from Sportsman's Warehouse on the way home from work. I'd forgotten about NAD until I read Fuze's post.
So mark me down for 300 rounds. I did my part!!
TCM
And it's still National Ammo Day!
And it's still National Ammo Day
MidwayUSA ships Rainier 200gr .45 plated flat point. Ordered to arrive today.
C'mon, let's see everybody's Ammo Day hauls.
20101114
used HP Photosmart 2575, cheap
Amusing email from Hewlett Packard:
Having just kicked my last HP printer to the curb, I could care less about getting as settlement an e-credit from HP toward the purchase of another.
And as much as I dislike the practice of litigating every wrong everywhere every time, I'd almost like to see the attorneys open this can of worms and spill it on the table. I was responsible for feeding an HP all-in-one in a TOC, artificially setting its date to 5 years in the past so we could keep using expired inkjet carts. I'm also still trying to remove the last auto-updating HP bloatwares from several computers.
The third lawsuit (Blennis) claims that HP designed certain inkjet printers and cartridges to shut down on an undisclosed expiration date, and that at this point consumers are prevented from using any ink remaining in the expired cartridge and from using all of the printer's functions until the expired cartridge is replaced. HP denies all these claims. . . . the parties agreed to a Proposed Settlement in order to avoid the expense and risks of continuing the lawsuit.
Having just kicked my last HP printer to the curb, I could care less about getting as settlement an e-credit from HP toward the purchase of another.
And as much as I dislike the practice of litigating every wrong everywhere every time, I'd almost like to see the attorneys open this can of worms and spill it on the table. I was responsible for feeding an HP all-in-one in a TOC, artificially setting its date to 5 years in the past so we could keep using expired inkjet carts. I'm also still trying to remove the last auto-updating HP bloatwares from several computers.
20101109
20101104
TCM stares down a troll...
...in comments over at The Truth About Guns.
Probably not my best effort, but it'll do.
Edit:
Apparently, I (shamelessly?) read the TTAG posts chronologically, thereby missing this response. It never ceases to amaze me how quickly the anti-gunners revert to ad hominem attacks. Reasoned discourse, my ass.
TCM
Probably not my best effort, but it'll do.
Edit:
Apparently, I (shamelessly?) read the TTAG posts chronologically, thereby missing this response. It never ceases to amaze me how quickly the anti-gunners revert to ad hominem attacks. Reasoned discourse, my ass.
TCM
20101009
Hie thee off to Alphecca
Republicans are contorted in the pantaloons over NRA endorsements?
Please leave something in the tip jar for Jeff.
Please leave something in the tip jar for Jeff.
20101002
I suddenly find myself wondering
I suddenly find myself wondering why i need to tell a bartender what "neat" means
20100923
20100922
OK, I'll play!!
The Cabinet Man here...
Below is my "on the body" carry rig:

That's a Springfield Armory XDm in 45 ACP. It rides in a Blade-Tech IWB holster with pull-the-dot loops. The spare mag and a Surefire Z2 Combatlight ride in a Blade-Tech combo pouch. All of that gets strapped on with a Wilderness Tactical 1-1/2" polymer-lined Frequent Flyer belt. The rig conceals pretty well as long as I'm wearing baggy shirts or a vest/jacket. It's surprisingly comfortable, too!
TCM
Below is my "on the body" carry rig:
That's a Springfield Armory XDm in 45 ACP. It rides in a Blade-Tech IWB holster with pull-the-dot loops. The spare mag and a Surefire Z2 Combatlight ride in a Blade-Tech combo pouch. All of that gets strapped on with a Wilderness Tactical 1-1/2" polymer-lined Frequent Flyer belt. The rig conceals pretty well as long as I'm wearing baggy shirts or a vest/jacket. It's surprisingly comfortable, too!
TCM
20100921
Carry rigs
SaysUncle asks, "what's your carry rig?"
Milt Sparks Summer Special above, Dillon kinda Yaqui slide below.
Biter the stainless Commander is comfy in either. She rode in the Sparks all day today.
El Paso Saddlery two-mag carrier (from CheaperThanDirt) not shown.
And visible in the upper edge of the pic is the steel cable for the Center-of-Mass in-car safe, which is indispensable.
Milt Sparks Summer Special above, Dillon kinda Yaqui slide below.
Biter the stainless Commander is comfy in either. She rode in the Sparks all day today.
El Paso Saddlery two-mag carrier (from CheaperThanDirt) not shown.
And visible in the upper edge of the pic is the steel cable for the Center-of-Mass in-car safe, which is indispensable.
Subscribe to:
Posts (Atom)





