20100807
more Grendel reloads
Crosswinds exceeding 30mph today.
BobbieJo sent some more 95 grain Hornady V Max downrange today. All were CCI 200 primers, Wolf brass. 5-round samples at 100 yards.
29.0 grains WC846, mild crimp. Average 2528 fps, SD 13.0 fps. All stayed in a 4" square at 100 yards
29.5 grains WC846, no crimp. Average 2591 fps, SD 25.1 fps. Not as well confined to 4" square.
29.5 grains WC846, mild crimp. Average 2600 fps, SD 17.2 fps. About the same spread as without crimp.
Elevation 6300 feet above sea level.
BobbieJo sent some more 95 grain Hornady V Max downrange today. All were CCI 200 primers, Wolf brass. 5-round samples at 100 yards.
29.0 grains WC846, mild crimp. Average 2528 fps, SD 13.0 fps. All stayed in a 4" square at 100 yards
29.5 grains WC846, no crimp. Average 2591 fps, SD 25.1 fps. Not as well confined to 4" square.
29.5 grains WC846, mild crimp. Average 2600 fps, SD 17.2 fps. About the same spread as without crimp.
Elevation 6300 feet above sea level.
20100801
Gear Review (of sorts): Fenix LD20 R4
[In the CD player: Lush, Gala...]
The wife and I currently use two 20th century bicycle headlights that use incandescent bulbs and lead-acid battery "cells". Categorizing these systems as marginal is something of an understatement. They're heavy, bulky, and not all that bright, even with recently-replaced battery packs. Unless it's absolutely pitch black and we're pedaling along at a lazy 10 MPH, they cannot be trusted to properly illuminate the roadway for us to clearly identify road hazards. At best, they'll alert a driver to our presence at night. Maybe. Bicycle lights have come a long way since I first invested in these systems almost 15 years ago. But they can still be expensive.
Then I found an alternative.
What we're gonna' talk about today is the Fenix LD20 R4 flashlight. (This is the newer LD20, that has a max 205 lumens...) I first caught wind of this little guy by way of the kind folks over at EcoVelo. There'd been a couple posts over there about using flashlights for bicycle lights and I really liked the idea. What appealed to me about the LD20 was (1) it's price, given that it can fill two roles, (2) the fact that it can take AA batteries, and (3) that it uses a constant-current LED drive circuit.
.JPG)
.JPG)
Most of the really bright flashlights (Surefire and Streamlight, for example) run off of CR123A batteries. These flashlights are great and I own several of them. The Missus gifted me a Surefire LED model that's bright enough to weld with! But I want something that uses rechargeable batteries, specifically rechargeable AAs. The problem with using the AA rechargeables is that their charged voltage is only ~1.2 volts. This voltage is low enough that most of my electronics gear fusses that the power is running low when I just installed freshly charged batteries. This is where the LD20's constant-current circuit comes in handy. Within reason, it doesn't care what the battery voltage is, as long as the batteries have the capacity to run the circuitry. Which the AA rechargeables do!
I won't go into a lot of detail about the LD20 'cuz you can get all that info for yourself just by following the linky. But the "added value" of the time you've spent reading this post is how the LD20 behaves while using different battery types. The Fenix web-site gives out the basics on time-vs-brightness, but what they don't tell you is under what conditions the tests were conducted. Well folks, I think I can answer a few questions about that since I was curious enough to conduct my own tests.
I borrowed a PIC microcontroller board and a photocell from work. I rewrote a mess of C code to turn the board into a data logger, rigged a cardboard box to act as the test rack, and proceeded to test the LD20 with five different types of batteries: Energizer Ultimate Lithium, Energizer Rechargeable (older), Energizer Rechargeable (newer), Energizer Alkaline, and Sony Eneloop rechargeable. The older Energizer rechargeables are probably four years old, though their charge/discharge count is pretty low. The newer ones are spankin' new, not even two weeks old. I used the 50 lumen setting for all the tests, which Fenix says provides 13 hours of runtime. (And the 50-lumen setting provides quite a bit more light than our current bicycle light systems.) Testing was done inside, so, say............, 75F.
.JPG)
The following graph shows relative brightness over time. I couldn't tell you what the exact brightness is in lumens, it's just the reading off of the A/D converter attached to the photocell. Just assume it's the advertised 50 lumens. This graph makes it obvious that the constant-current circuit is doing its thing: when the batteries are dead, they're dead!!

As one would expect, the Ultimate Lithiums produce significantly better results than the other batteries. However, they're not rechargeable and they're wicked expensive at over $2 each!! They would be a good choice, however, for emergency operations where long run-times (and shelf-lives) are important -- and cost is not. (Lithiums will also perform better at temperature extremes than the other batteries will...) The other four batteries are quite comparable in their performances. The good news is that the rechargeables -- even with their lower full-charge voltage -- have capacities nearly equal to that of the alkalines.
To summarize the run-times:

It looks like we have a winner! Of course it remains to be seen how the rechargeables will work in colder weather, which is really the only time we need to use lights on the bicycles. But even if they give us a full week's commuting between charges (~6 hours, worse case), then they'll work great. So check back in about 6 months and we'll update on how this arrangement works. Until then .............. ciao!!
TCM
The wife and I currently use two 20th century bicycle headlights that use incandescent bulbs and lead-acid battery "cells". Categorizing these systems as marginal is something of an understatement. They're heavy, bulky, and not all that bright, even with recently-replaced battery packs. Unless it's absolutely pitch black and we're pedaling along at a lazy 10 MPH, they cannot be trusted to properly illuminate the roadway for us to clearly identify road hazards. At best, they'll alert a driver to our presence at night. Maybe. Bicycle lights have come a long way since I first invested in these systems almost 15 years ago. But they can still be expensive.
Then I found an alternative.
What we're gonna' talk about today is the Fenix LD20 R4 flashlight. (This is the newer LD20, that has a max 205 lumens...) I first caught wind of this little guy by way of the kind folks over at EcoVelo. There'd been a couple posts over there about using flashlights for bicycle lights and I really liked the idea. What appealed to me about the LD20 was (1) it's price, given that it can fill two roles, (2) the fact that it can take AA batteries, and (3) that it uses a constant-current LED drive circuit.
Most of the really bright flashlights (Surefire and Streamlight, for example) run off of CR123A batteries. These flashlights are great and I own several of them. The Missus gifted me a Surefire LED model that's bright enough to weld with! But I want something that uses rechargeable batteries, specifically rechargeable AAs. The problem with using the AA rechargeables is that their charged voltage is only ~1.2 volts. This voltage is low enough that most of my electronics gear fusses that the power is running low when I just installed freshly charged batteries. This is where the LD20's constant-current circuit comes in handy. Within reason, it doesn't care what the battery voltage is, as long as the batteries have the capacity to run the circuitry. Which the AA rechargeables do!
I won't go into a lot of detail about the LD20 'cuz you can get all that info for yourself just by following the linky. But the "added value" of the time you've spent reading this post is how the LD20 behaves while using different battery types. The Fenix web-site gives out the basics on time-vs-brightness, but what they don't tell you is under what conditions the tests were conducted. Well folks, I think I can answer a few questions about that since I was curious enough to conduct my own tests.
I borrowed a PIC microcontroller board and a photocell from work. I rewrote a mess of C code to turn the board into a data logger, rigged a cardboard box to act as the test rack, and proceeded to test the LD20 with five different types of batteries: Energizer Ultimate Lithium, Energizer Rechargeable (older), Energizer Rechargeable (newer), Energizer Alkaline, and Sony Eneloop rechargeable. The older Energizer rechargeables are probably four years old, though their charge/discharge count is pretty low. The newer ones are spankin' new, not even two weeks old. I used the 50 lumen setting for all the tests, which Fenix says provides 13 hours of runtime. (And the 50-lumen setting provides quite a bit more light than our current bicycle light systems.) Testing was done inside, so, say............, 75F.
The following graph shows relative brightness over time. I couldn't tell you what the exact brightness is in lumens, it's just the reading off of the A/D converter attached to the photocell. Just assume it's the advertised 50 lumens. This graph makes it obvious that the constant-current circuit is doing its thing: when the batteries are dead, they're dead!!

As one would expect, the Ultimate Lithiums produce significantly better results than the other batteries. However, they're not rechargeable and they're wicked expensive at over $2 each!! They would be a good choice, however, for emergency operations where long run-times (and shelf-lives) are important -- and cost is not. (Lithiums will also perform better at temperature extremes than the other batteries will...) The other four batteries are quite comparable in their performances. The good news is that the rechargeables -- even with their lower full-charge voltage -- have capacities nearly equal to that of the alkalines.
To summarize the run-times:

It looks like we have a winner! Of course it remains to be seen how the rechargeables will work in colder weather, which is really the only time we need to use lights on the bicycles. But even if they give us a full week's commuting between charges (~6 hours, worse case), then they'll work great. So check back in about 6 months and we'll update on how this arrangement works. Until then .............. ciao!!
TCM
20100717
Hallelujah!
Old Western Scrounger still breathes!!!!!
I hadn't ordered anything from them since before the intertubes.
Found via Gibbs Rifle via SayUncle.
I hadn't ordered anything from them since before the intertubes.
Found via Gibbs Rifle via SayUncle.
20100711
aftermarket AK replacement parts
This is either an opportunity for an enterprising cottage industry type, or a bleg:
Who makes high-reliability domestic replacement parts for the Kalashnikov? Extractor, extractor spring and pin, firing pin and retaining pin, mainspring?
Sure, the original Warsaw Pact parts are making their way to the States, and probably in volumes that make aftermarket parts not worth the bother. I'm tempted to just get another kit or two (the ones with the worthless cut-up barrels) just to have replacement parts. But I'd probably just get Amerikanski barrels and build them.
Anybody have a lead?
Who makes high-reliability domestic replacement parts for the Kalashnikov? Extractor, extractor spring and pin, firing pin and retaining pin, mainspring?
Sure, the original Warsaw Pact parts are making their way to the States, and probably in volumes that make aftermarket parts not worth the bother. I'm tempted to just get another kit or two (the ones with the worthless cut-up barrels) just to have replacement parts. But I'd probably just get Amerikanski barrels and build them.
Anybody have a lead?
If Glenn really wanted a solar-powered air conditioner
We should borrow recreational vehicle technology. I grasp the concept of the latent heat of vaporization, though this article on propane-powered RV refrigerators is a bit harder to follow.
What could be so difficult about scaling this hardware up to a size that could air-condition a house? The difficult part is radiating away the heat after the hardware is done with it. That task would be enhanced with a leetle photovoltaic power to drive a fan over the radiator.
Such a system would be about as obtrusive and unsightly as existing A/C units, if the solar collector and radiator can be hidden in roofing and chimneys. This is where engineers earn their pay. There would be greater difficulty selling these units past the esthetics prudes of homeowners' associations, than getting the equipment to work.
It's not as if we'd be dealing with dangerous or exotic materials: ammonia and water and a bit of hydrogen. The hydrogen would have to be replaced periodically, but that's easier, at the scales of the service technician and of the national economy, than powering automobiles with hydrogen.
Durability? Remember, the existing units are mounted on moving vehicles, getting vibrated and going through temperature and humidity cycles. It should be cake to build a unit like this suitable for home use in a climate with a lot of direct sunlight, like Colorado or Wyoming. Then it has the added Gaia-closed-cycle-ness of making more cold air when more is needed. Let's not burn propane to do this.
The domestic water heater can probably be integrated into this equipment too. Waste heat, remember?
What could be so difficult about scaling this hardware up to a size that could air-condition a house? The difficult part is radiating away the heat after the hardware is done with it. That task would be enhanced with a leetle photovoltaic power to drive a fan over the radiator.
Such a system would be about as obtrusive and unsightly as existing A/C units, if the solar collector and radiator can be hidden in roofing and chimneys. This is where engineers earn their pay. There would be greater difficulty selling these units past the esthetics prudes of homeowners' associations, than getting the equipment to work.
It's not as if we'd be dealing with dangerous or exotic materials: ammonia and water and a bit of hydrogen. The hydrogen would have to be replaced periodically, but that's easier, at the scales of the service technician and of the national economy, than powering automobiles with hydrogen.
Durability? Remember, the existing units are mounted on moving vehicles, getting vibrated and going through temperature and humidity cycles. It should be cake to build a unit like this suitable for home use in a climate with a lot of direct sunlight, like Colorado or Wyoming. Then it has the added Gaia-closed-cycle-ness of making more cold air when more is needed. Let's not burn propane to do this.
The domestic water heater can probably be integrated into this equipment too. Waste heat, remember?
20100709
PMC .45 ACP
$19.99 for box of 50, 230gr FMJ.
At your local Murdoch's.
If you don't have a local Murdoch's, well, it sucks to be you.
At your local Murdoch's.
If you don't have a local Murdoch's, well, it sucks to be you.
20100626
A ring job in order
At about 200 rounds of Wolf Gold 6.5mm Grendel, and after firing fewer than 40 rounds of reloads, Bobbie Jo is in need of a ring job.
These are the rings originally provided by Alexander Arms with their bolt/barrel set. From left to right, the rings are nearest bolt face to farthest, so the ring closest to the hot gases is the one on the right, the one with most of its substance eaten away:

Bobbie Jo now sports a McFarland one-piece gapless ring, and the other ARs will probably have theirs soon too. But it makes me wonder, am I not lubricating the rings adequately for break-in? Can break-in of gas rings be improved with bore paste?
I can also see which parts I want in a spares kit for ARs, and which deserve periodic replacement.
BTW, the reloads were a) 120 gr Sierra Pro Hunters in front of 30.5 gr AA2520, 2349 fps, and b) 95 gr Hornady V-Max over 28.5 gr WC846, 2257 fps. At 6100 feet above MSL, with Alexander's (E. R. Shaw's) 16" stainless barrel, stock midlength gas tube.
These are the rings originally provided by Alexander Arms with their bolt/barrel set. From left to right, the rings are nearest bolt face to farthest, so the ring closest to the hot gases is the one on the right, the one with most of its substance eaten away:
Bobbie Jo now sports a McFarland one-piece gapless ring, and the other ARs will probably have theirs soon too. But it makes me wonder, am I not lubricating the rings adequately for break-in? Can break-in of gas rings be improved with bore paste?
I can also see which parts I want in a spares kit for ARs, and which deserve periodic replacement.
BTW, the reloads were a) 120 gr Sierra Pro Hunters in front of 30.5 gr AA2520, 2349 fps, and b) 95 gr Hornady V-Max over 28.5 gr WC846, 2257 fps. At 6100 feet above MSL, with Alexander's (E. R. Shaw's) 16" stainless barrel, stock midlength gas tube.
20100611
So would I, brother, so would I
I’d be very curious to know which law professors, if any, thought it was appropriate to sign their name to a piece ghostwritten by a member of the Clinton administration, defending Clinton.
VC.
20100610
Things that make me go, "hunh"
A tradesman came to the house recently to quote some work. It was just as the school year here was closing, so he had a grandson in tow.
In the course of introductions, the Latino grandfather told me the boy's name was "Shehadi." He said it with, it seemed to me, some minor embarrassment.
Did Grandpa understand that this boy's name literally means Muslim confession of faith, and figuratively means 'martyr'? Is there a trend among Latino women to make names up from thin air or overheard phonemes on broadcast media?
In the course of introductions, the Latino grandfather told me the boy's name was "Shehadi." He said it with, it seemed to me, some minor embarrassment.
Did Grandpa understand that this boy's name literally means Muslim confession of faith, and figuratively means 'martyr'? Is there a trend among Latino women to make names up from thin air or overheard phonemes on broadcast media?
20100608
The harmonic makes her move
Firstborn and I chose to attend the Rocky Mountain Hamvention this year in Casper. As we discussed it, Mlle. Sklodovska took an interest and invited herself along.
The first hour we were there, we came to the end of the swapmeet tables and found the checkin counter. Firstborn and I got our badges, and the convention organizers let Mlle. Sklodovska into the festivities with a smile, and printed her a badge, "Harmonic of [Fûz's callsign]." That use of the term 'harmonic' was new to me, but clever and likable.
The two girls found another amateur waving a VHF yagi around for the indoor foxhunt, which is what sold Firstborn on the hamvention in the first place. All 3 girls spent the next hour or so on the foxhunt.
Since then she's been asking to find her old Uncle's breadboard and start learning electronics. I dug it out and put a few quick sketches of Ohm's law and RC time constants on a whiteboard, then walked her through building a 555 one-shot on the breadboard.
It didn't work, but she said "we'll try again tomorrow night."
Clearly she will be the next ham in the house.
The first hour we were there, we came to the end of the swapmeet tables and found the checkin counter. Firstborn and I got our badges, and the convention organizers let Mlle. Sklodovska into the festivities with a smile, and printed her a badge, "Harmonic of [Fûz's callsign]." That use of the term 'harmonic' was new to me, but clever and likable.
The two girls found another amateur waving a VHF yagi around for the indoor foxhunt, which is what sold Firstborn on the hamvention in the first place. All 3 girls spent the next hour or so on the foxhunt.
Since then she's been asking to find her old Uncle's breadboard and start learning electronics. I dug it out and put a few quick sketches of Ohm's law and RC time constants on a whiteboard, then walked her through building a 555 one-shot on the breadboard.
It didn't work, but she said "we'll try again tomorrow night."
Clearly she will be the next ham in the house.
20100603
Car-Free Month Post-Mortem
[in the CD player: Curve, Doppelganger]
Sorry, folks -- I should know better than to promise that I'll do something involving discretionary time...
So here's the (anxiously awaited!) postmortem of the Car-Free Month (CFM).
Let's start with the good stuff.
Of the 20 available workdays in May, the Missus and I rode to/from work 19 times. That's 95% -- and better than we'd expected! We took a vehicle to work on the 12th due to icy roads in the neighborhood. Of the five Sundays (grocery days) in May, we hauled groceries by human power four times. We drove a vehicle on the 16th because we were on a wicked-tight schedule that day and every second counted. We took a vehicle to the gun club every Saturday (twice on two days) because we were hauling match equipment that would have been impractical (impossible?) by bicycle. On those days, we twice took advantage of access to the vehicle for "side trips" to Home Depot. I took my motorcycle to a meeting on the 4th that was across town and notorious for finishing well after dark. Looking at the mileage:
Bicycle:
Vehicle:
So we put in almost twice the mileage on the bicycles than on the vehicles. Woo-Hoo!!
Commuting to/from work, we mostly stuck to the roads, taking the Front Range Trail for the entire commute only once. When we were both on bicycles -- as opposed to me being on the TerraTrike Tour (TTT) tadpole recumbent -- we tended to return home by way of downtown. It saves almost ten minutes, a acceptable ROI for having to deal with "city traffic" for a mere four blocks. I only took the trike thru downtown once, trying to outrun the rain. The TTT is definitely not at home in that environment!
I alternated between the Cannondale and the TTT, splitting the miles pretty evenly between the two. The Missus has only her road-tired mountain bike so all her miles were put onto it. On Mondays, we always bring to work our week's breakfasts and lunches. For the CFM, we employed the BOB trailer for this task and it handled the 20 meals just fine. Other than 15 minutes spent re-aligning the rear derailleur on the Cannondale, there were no mechanical issues.
The weather was (mostly) cooperative. The morning temps are still pretty nippy in May 'round these parts. More than half the mornings were below 40 and only three were 50 or above. A handful of the afternoon rides home were done in 80+ temps. We got rained on three times: both trips to/from work on one day and an afternoon of heavy dizzle / light rain last week. This isn't bad, especially since the (every afternoon!) 15-minute thunderstorms start in June and run thru August.
Now that I have 200 or so miles on the TerraTrike Tour, I can make some (reasonably) intelligent comments about it.
TTT Cons:
It's just too low to the ground for mingling with congested traffic. I'm OK with it on lightly-vehicled side streets or roads with Lots O'Shoulder but I get the wiggins in heavy traffic. I do plan to do some week-long (+) tours on it at some point so I'll have to be double careful when I pedal thru any towns. The biggest problem I've faced is people backing their cars out of driveways. They simply cannot see me -- and so I'm continuously in condition red when I'm pedaling thru the 'burbs.
You can't "muscle" the trike like you can a bicycle and it's very unforgiving of being stuck in too high a gear. I find myself doing a lot of shifting to keep my pedal cadence "reasonable" (80 RPM, +/-). Stopping at a traffic light while three gears too high is a real experience! Fortunately, in the the worst cases of "duh...", I can just grab the wheels with my hands (wheelchair-style) and get rolling enough to downshift without grinding metal.
The Trike takes steep climbs very slowly. We have an ugly (but short) climb on the way to work and it's One Steep 'Muther. On the Trike, I'm in lowest gear in no time and grinding-out the climb, rookie-style. I'm sure this is a combination of higher weight and higher rolling resistance compared to a bicycle. Since it's hard to "muscle" the Trike up a steep climb, you really do need to keep the gears low and just crawl. After a half-dozen trips on the TTT and returning to the Cannondale, I was quickly reminded how much of a mountain goat the T2000 really is. The Cannondale's climbing speeds were 50% higher than the TTT's on the hard stuff. That said, the TTT is fine on "normal" hills and I didn't feel all that disadvantaged. I spent a good part of the month grumbling about its climbing abilities and not until we did the 30-mile "country ride" did I discover that it can handle eastern Colorado rollers just fine.
The TTT's high-speed stability leaves a bit to be desired. Above 25 MPH, the steering starts to get a little twitchy. I've found I can calm things down considerably by letting the bars free-float in my hands on these high-speed descents. This technique doesn't completely eliminate the "unpredictability" and as speeds increase upwards of 30 MPH, things get .................. interesting.
I used to own a Polaris ATV. It was a lot of fun until I started developing some confidence and mustered the courage to tackle more difficult terrain. One of the things I noticed about the problems I repeatedly found myself getting into was "picking a line". See, I grew up riding dirt bikes -- so picking a line thru a difficult stretch was just that: picking a line. One line. Once I got the ATV, I was faced with finding two lines thru whatever mess I was about to get into. And I invariably found one good line and one bad line. But the second track of tires still had to go somewhere. And usually "somewhere" was trouble.
What does an ATV have to do with this post? Well, the TTT has three lines. Granted I don't ride the TTT off-road but that doesn't mean that street surfaces are perfect. Some of those potholes are downright vicious. So when I'm on the Trike, I spend a lot of time focusing on the road surface because I gotta' get three tires thru whatever mess I'm about to tangle with. More than once I've had to make the split-second decision: which of the three tires am I gonna' run into that pothole. Kinda' distracting sometimes...
This is a minor nitpick but there's no speedometer mount. There's some sort of bracket on the left (front) that tracks with the wheel which I employed to hold the speedo pickup but it's a poor solution. I tried tie-wrapping some small-diameter PVC to the bracket but the solution didn't really take. I was forever plucking the pickup out of the track of the magnet after some major jarring caused the mount to shift. I'm sure if I really, really thought about the problem, the solution would be obvious. I haven't, so it's not. TerraTrike would do well to solve that for its customers. Maybe they have and I just haven't looked hard enough.
One of the things a bicycle rider learns once he crosses the threshold from recreational (bike path) riding to hard-core (obsessive racing) riding is that seat height is very important. I'm surprised how small the window is between my bicycle seat being too high or too low. For me that window is about 1/4" and getting it wrong results in a couple mighty angry knees. In fact, I went thru quite the gyrations to make sure my SPD-equipped mountain bike (and T2000) had the exact same seat height as my Look-equipped Litespeed. The TTT doesn't have "seat height" as a bicyclist might understand. It does, however, have an adjustment to move the cyclist back-n-forth in relation to the pedals. The difficulty of this adjustment is compounded by the fact that the back-rest angle can be changed, which ultimately changes the (effective) "seat height". So there was a lot of trial-n-error getting it right. Ultimately the adjustments are kinda' coarse but, fortunately, I found a spot that worked very nicely.
The trick was staying in that spot. See, the nylon seat is really slippery. For folks that pedal their trikes around in shorts or jeans [hack, spit], it's probably not an issue. But I ride in Spandex (B&PBUI) and sliding around on the TTT's seat was totally screwing with my "seat height". I tweaked a knee on the second ride and it was a couple days before it worked itself out. But I found a rather brilliant solution: anti-slip matting. This is the stuff you can buy to put under throw rugs to keep them from sliding around on tile/wood floors. It also shows up as "bottom liner" in the produce bins at supermarkets. I had some that I'd bought to protect the plastic surfaces of my motorcycle from my saddlebags. The stuff is "perforated" so it breathes (sorta') and it's cheap enough to replace regularly. It keeps me parked in the seat and it works great.
Lastly, there's no way to wear a backpack/Camelbak or messenger bag. This is obvious and I knew it going into this deal -- but I miss having that flexibility. It's not fatal, of course.
TTT Pros:
No review of the TerraTrike would be complete without a discussion of just how comfortable this machine really is. I'm amazed that the Missus and I pedaled a 30-mile loop and nothing -- NOTHING!! -- hurt. Usually, I'm fighting to keep my hands (or balls) from going numb or my seat bones from getting sore. I know what you're thinking: "Dude, your bicycle ergos are all wrong!" That'd be a true statement if I didn't have a huge box full of saddles, seat posts, and head sets -- all remnants of the Fruitless Search for Bicycle Comfort. Sure, some days are better than others and after 100s of combinations-and-permutations, I've gotten really, really close on the bicycles. Just not perfect. But nuthin' wears so little on the body as the TTT. Think of it as a Lay-Z-Boy with pedals. With all I've mentioned above concerning the TTT's cons, the comfort level of this trike trumps all that. Period.
And while I stated that the TTT can't be muscled, don't confuse that with it being sluggish. It's a surprisingly sprightly machine when handled properly (correct gearing, anticipating "obstacles", avoiding unnecessary weight, correct ergos, etc). While it can't come close to the acceleration potential of the Litespeed, the TTT is pretty much on par with the T2000, when the latter is ridden as it was designed. The turning radius is rarely a hindrance and can be ............... abbreviated with brake-steering. I'm sure that regular heavy doses of that could lead to the premature wear of various hard parts but I wouldn't expect a little "brake English" now-n-again to cause many problems.
Another overlooked advantage is what I'll call "foot-free stopping". At first, it's kinda' weird to pull up to a stoplight and not have to put a foot down. You just, well......................., stop. No cleats slipping on oily roads and no fighting to get re-cleated upon starting. Depending on your ride, you can probably lock-in in the garage and unlock when you return two hours later. I once test rode a Piaggio MP3 for a friend that had no motorcycle license. These scooters -- like the TTT -- have two wheels up front and one in the rear. The MP3 has a complicated (to me) front end suspension system that allows the scooter to be leaned thru a curve. However, it also has a "suspension locking" feature that locks the tilting hardware at speeds below (something like) 5 MPH, which means the rider can stop at a light w/o putting a foot down. This allows Miss DMA (Dainty Management Assistant) to wear her high heels to work and not have to get them mucky at a stoplight. I always thought it was a silly feature but riding the TTT has changed my mind. So, to Piaggio, I apologize. Well done!!
There's one more indirect advantage to the TTT: bar ends shifters. The TTT comes with them and they're The Tool For The Job. I'm pretty much a Luddite when it comes to mechanical doo-hickeys but I'd long-ago grown quite fond of the Shimano STI shifter/brake setup that came with the Litespeed. When I completed the cross-country trip in 1998, I thought it might be cool to have the T2000's (perfectly reliable) bar-ends replaced with an STI system. So I did and it was. For about a week. For the next 12 years I regretted that decision. After the first half-dozen rides on the TTT, I said, "That's it, dammit -- the T2000 gets its bar-ends back!" I dug out the old parts and cashed-in on a local bike shop's pre-season tune-up special to get them re-installed. And I couldn't be happier! (Part of me -- the Luddite part of me -- briefly considered having down-tube shifters installed but that's a bit too retro for even TCM...)
So that's pretty much the summary. I had a great time riding thru May and look forward to falling back on those good habits in the future. The Missus was uncertain about not only the CFM but the 30-miler as well. But she dug deep and completed both with grace and aplomb. She now has the confidence and the fitness base to go father and faster. Hell, there may even be a bike trip in our future!! Who knows??
So thanx for checking back. Sorry it look so long...
TCM
[Editor's note: The other day, the hardware engineering manager -- the Missus' boss and fellow cyclist -- asked me where he might find some old-style thumb shifters. Not the early RapidFire-style shifters, but older than that even. The only place I figger'ed might have them was Rivendell. (And I was right...) Which reminded me that I always thought that Rivendell's moustache handlebar was really cool and would work well on a commuter bike. So I spent the next 1/2-hour or so employing Google-fu to find pictures of the moustache bars installed on various bikes. Unfortunately, during my net wanderings, I stumbled across this and this:
O. M. G.
I'm sorry folks but that is quite possibly the most attractive bicycle TCM has ever laid eyes upon. ("Sorry, Litespeed, my dear, I'm not taking it back...") It's a Rivendell "Sam Hillborne" and I suspect it's wearing custom paint and fenders. That bike right there would make me wish I had my driver's license revoked and a 40-mile R/T commute to work!! That's one damned fine lookin' ride, sir, and I am terminally jealous...]
Sorry, folks -- I should know better than to promise that I'll do something involving discretionary time...
So here's the (anxiously awaited!) postmortem of the Car-Free Month (CFM).
Let's start with the good stuff.
Of the 20 available workdays in May, the Missus and I rode to/from work 19 times. That's 95% -- and better than we'd expected! We took a vehicle to work on the 12th due to icy roads in the neighborhood. Of the five Sundays (grocery days) in May, we hauled groceries by human power four times. We drove a vehicle on the 16th because we were on a wicked-tight schedule that day and every second counted. We took a vehicle to the gun club every Saturday (twice on two days) because we were hauling match equipment that would have been impractical (impossible?) by bicycle. On those days, we twice took advantage of access to the vehicle for "side trips" to Home Depot. I took my motorcycle to a meeting on the 4th that was across town and notorious for finishing well after dark. Looking at the mileage:
Bicycle:
Work: 14 miles round trip (R/T) x 19 days x 2 bicycles = 532 miles
Groceries: 2 miles R/T x 4 weekends x 2 bicycles = 16 miles
Country Spin: 30 miles x 2 bicycles = 60 miles
Total = 608 miles
Vehicle:
Meeting: 18 miles R/T x 1 day x 1 vehicle = 18 miles
Work: 14 miles R/T x 1 day x 1 vehicle = 14 miles
Club: 40 miles R/T x 7 days x 1 vehicle = 280 miles
Side trips: 6 miles x 5 days x 1 vehicle = 30 miles
Groceries: 2 miles R/T x 1 day x 1 vehicle = 2 miles
Total = 344 miles
So we put in almost twice the mileage on the bicycles than on the vehicles. Woo-Hoo!!
Commuting to/from work, we mostly stuck to the roads, taking the Front Range Trail for the entire commute only once. When we were both on bicycles -- as opposed to me being on the TerraTrike Tour (TTT) tadpole recumbent -- we tended to return home by way of downtown. It saves almost ten minutes, a acceptable ROI for having to deal with "city traffic" for a mere four blocks. I only took the trike thru downtown once, trying to outrun the rain. The TTT is definitely not at home in that environment!
I alternated between the Cannondale and the TTT, splitting the miles pretty evenly between the two. The Missus has only her road-tired mountain bike so all her miles were put onto it. On Mondays, we always bring to work our week's breakfasts and lunches. For the CFM, we employed the BOB trailer for this task and it handled the 20 meals just fine. Other than 15 minutes spent re-aligning the rear derailleur on the Cannondale, there were no mechanical issues.
The weather was (mostly) cooperative. The morning temps are still pretty nippy in May 'round these parts. More than half the mornings were below 40 and only three were 50 or above. A handful of the afternoon rides home were done in 80+ temps. We got rained on three times: both trips to/from work on one day and an afternoon of heavy dizzle / light rain last week. This isn't bad, especially since the (every afternoon!) 15-minute thunderstorms start in June and run thru August.
Now that I have 200 or so miles on the TerraTrike Tour, I can make some (reasonably) intelligent comments about it.
TTT Cons:
It's just too low to the ground for mingling with congested traffic. I'm OK with it on lightly-vehicled side streets or roads with Lots O'Shoulder but I get the wiggins in heavy traffic. I do plan to do some week-long (+) tours on it at some point so I'll have to be double careful when I pedal thru any towns. The biggest problem I've faced is people backing their cars out of driveways. They simply cannot see me -- and so I'm continuously in condition red when I'm pedaling thru the 'burbs.
You can't "muscle" the trike like you can a bicycle and it's very unforgiving of being stuck in too high a gear. I find myself doing a lot of shifting to keep my pedal cadence "reasonable" (80 RPM, +/-). Stopping at a traffic light while three gears too high is a real experience! Fortunately, in the the worst cases of "duh...", I can just grab the wheels with my hands (wheelchair-style) and get rolling enough to downshift without grinding metal.
The Trike takes steep climbs very slowly. We have an ugly (but short) climb on the way to work and it's One Steep 'Muther. On the Trike, I'm in lowest gear in no time and grinding-out the climb, rookie-style. I'm sure this is a combination of higher weight and higher rolling resistance compared to a bicycle. Since it's hard to "muscle" the Trike up a steep climb, you really do need to keep the gears low and just crawl. After a half-dozen trips on the TTT and returning to the Cannondale, I was quickly reminded how much of a mountain goat the T2000 really is. The Cannondale's climbing speeds were 50% higher than the TTT's on the hard stuff. That said, the TTT is fine on "normal" hills and I didn't feel all that disadvantaged. I spent a good part of the month grumbling about its climbing abilities and not until we did the 30-mile "country ride" did I discover that it can handle eastern Colorado rollers just fine.
The TTT's high-speed stability leaves a bit to be desired. Above 25 MPH, the steering starts to get a little twitchy. I've found I can calm things down considerably by letting the bars free-float in my hands on these high-speed descents. This technique doesn't completely eliminate the "unpredictability" and as speeds increase upwards of 30 MPH, things get .................. interesting.
I used to own a Polaris ATV. It was a lot of fun until I started developing some confidence and mustered the courage to tackle more difficult terrain. One of the things I noticed about the problems I repeatedly found myself getting into was "picking a line". See, I grew up riding dirt bikes -- so picking a line thru a difficult stretch was just that: picking a line. One line. Once I got the ATV, I was faced with finding two lines thru whatever mess I was about to get into. And I invariably found one good line and one bad line. But the second track of tires still had to go somewhere. And usually "somewhere" was trouble.
What does an ATV have to do with this post? Well, the TTT has three lines. Granted I don't ride the TTT off-road but that doesn't mean that street surfaces are perfect. Some of those potholes are downright vicious. So when I'm on the Trike, I spend a lot of time focusing on the road surface because I gotta' get three tires thru whatever mess I'm about to tangle with. More than once I've had to make the split-second decision: which of the three tires am I gonna' run into that pothole. Kinda' distracting sometimes...
This is a minor nitpick but there's no speedometer mount. There's some sort of bracket on the left (front) that tracks with the wheel which I employed to hold the speedo pickup but it's a poor solution. I tried tie-wrapping some small-diameter PVC to the bracket but the solution didn't really take. I was forever plucking the pickup out of the track of the magnet after some major jarring caused the mount to shift. I'm sure if I really, really thought about the problem, the solution would be obvious. I haven't, so it's not. TerraTrike would do well to solve that for its customers. Maybe they have and I just haven't looked hard enough.
One of the things a bicycle rider learns once he crosses the threshold from recreational (bike path) riding to hard-core (obsessive racing) riding is that seat height is very important. I'm surprised how small the window is between my bicycle seat being too high or too low. For me that window is about 1/4" and getting it wrong results in a couple mighty angry knees. In fact, I went thru quite the gyrations to make sure my SPD-equipped mountain bike (and T2000) had the exact same seat height as my Look-equipped Litespeed. The TTT doesn't have "seat height" as a bicyclist might understand. It does, however, have an adjustment to move the cyclist back-n-forth in relation to the pedals. The difficulty of this adjustment is compounded by the fact that the back-rest angle can be changed, which ultimately changes the (effective) "seat height". So there was a lot of trial-n-error getting it right. Ultimately the adjustments are kinda' coarse but, fortunately, I found a spot that worked very nicely.
The trick was staying in that spot. See, the nylon seat is really slippery. For folks that pedal their trikes around in shorts or jeans [hack, spit], it's probably not an issue. But I ride in Spandex (B&PBUI) and sliding around on the TTT's seat was totally screwing with my "seat height". I tweaked a knee on the second ride and it was a couple days before it worked itself out. But I found a rather brilliant solution: anti-slip matting. This is the stuff you can buy to put under throw rugs to keep them from sliding around on tile/wood floors. It also shows up as "bottom liner" in the produce bins at supermarkets. I had some that I'd bought to protect the plastic surfaces of my motorcycle from my saddlebags. The stuff is "perforated" so it breathes (sorta') and it's cheap enough to replace regularly. It keeps me parked in the seat and it works great.
Lastly, there's no way to wear a backpack/Camelbak or messenger bag. This is obvious and I knew it going into this deal -- but I miss having that flexibility. It's not fatal, of course.
TTT Pros:
No review of the TerraTrike would be complete without a discussion of just how comfortable this machine really is. I'm amazed that the Missus and I pedaled a 30-mile loop and nothing -- NOTHING!! -- hurt. Usually, I'm fighting to keep my hands (or balls) from going numb or my seat bones from getting sore. I know what you're thinking: "Dude, your bicycle ergos are all wrong!" That'd be a true statement if I didn't have a huge box full of saddles, seat posts, and head sets -- all remnants of the Fruitless Search for Bicycle Comfort. Sure, some days are better than others and after 100s of combinations-and-permutations, I've gotten really, really close on the bicycles. Just not perfect. But nuthin' wears so little on the body as the TTT. Think of it as a Lay-Z-Boy with pedals. With all I've mentioned above concerning the TTT's cons, the comfort level of this trike trumps all that. Period.
And while I stated that the TTT can't be muscled, don't confuse that with it being sluggish. It's a surprisingly sprightly machine when handled properly (correct gearing, anticipating "obstacles", avoiding unnecessary weight, correct ergos, etc). While it can't come close to the acceleration potential of the Litespeed, the TTT is pretty much on par with the T2000, when the latter is ridden as it was designed. The turning radius is rarely a hindrance and can be ............... abbreviated with brake-steering. I'm sure that regular heavy doses of that could lead to the premature wear of various hard parts but I wouldn't expect a little "brake English" now-n-again to cause many problems.
Another overlooked advantage is what I'll call "foot-free stopping". At first, it's kinda' weird to pull up to a stoplight and not have to put a foot down. You just, well......................., stop. No cleats slipping on oily roads and no fighting to get re-cleated upon starting. Depending on your ride, you can probably lock-in in the garage and unlock when you return two hours later. I once test rode a Piaggio MP3 for a friend that had no motorcycle license. These scooters -- like the TTT -- have two wheels up front and one in the rear. The MP3 has a complicated (to me) front end suspension system that allows the scooter to be leaned thru a curve. However, it also has a "suspension locking" feature that locks the tilting hardware at speeds below (something like) 5 MPH, which means the rider can stop at a light w/o putting a foot down. This allows Miss DMA (Dainty Management Assistant) to wear her high heels to work and not have to get them mucky at a stoplight. I always thought it was a silly feature but riding the TTT has changed my mind. So, to Piaggio, I apologize. Well done!!
There's one more indirect advantage to the TTT: bar ends shifters. The TTT comes with them and they're The Tool For The Job. I'm pretty much a Luddite when it comes to mechanical doo-hickeys but I'd long-ago grown quite fond of the Shimano STI shifter/brake setup that came with the Litespeed. When I completed the cross-country trip in 1998, I thought it might be cool to have the T2000's (perfectly reliable) bar-ends replaced with an STI system. So I did and it was. For about a week. For the next 12 years I regretted that decision. After the first half-dozen rides on the TTT, I said, "That's it, dammit -- the T2000 gets its bar-ends back!" I dug out the old parts and cashed-in on a local bike shop's pre-season tune-up special to get them re-installed. And I couldn't be happier! (Part of me -- the Luddite part of me -- briefly considered having down-tube shifters installed but that's a bit too retro for even TCM...)
So that's pretty much the summary. I had a great time riding thru May and look forward to falling back on those good habits in the future. The Missus was uncertain about not only the CFM but the 30-miler as well. But she dug deep and completed both with grace and aplomb. She now has the confidence and the fitness base to go father and faster. Hell, there may even be a bike trip in our future!! Who knows??
So thanx for checking back. Sorry it look so long...
TCM
[Editor's note: The other day, the hardware engineering manager -- the Missus' boss and fellow cyclist -- asked me where he might find some old-style thumb shifters. Not the early RapidFire-style shifters, but older than that even. The only place I figger'ed might have them was Rivendell. (And I was right...) Which reminded me that I always thought that Rivendell's moustache handlebar was really cool and would work well on a commuter bike. So I spent the next 1/2-hour or so employing Google-fu to find pictures of the moustache bars installed on various bikes. Unfortunately, during my net wanderings, I stumbled across this and this:
O. M. G.
I'm sorry folks but that is quite possibly the most attractive bicycle TCM has ever laid eyes upon. ("Sorry, Litespeed, my dear, I'm not taking it back...") It's a Rivendell "Sam Hillborne" and I suspect it's wearing custom paint and fenders. That bike right there would make me wish I had my driver's license revoked and a 40-mile R/T commute to work!! That's one damned fine lookin' ride, sir, and I am terminally jealous...]
20100514
Too clever by half
A meme running around Facebook these days, about violence against women:
and so forth.
Two thoughts on that:
I am not making light of domestic violence. But if eloquent feminists want to draw attention to it and get women and men to post something on their Walls condemning domestic violence, this is not the message.
Isn't it enough to say that men who intimidate the women who are close to them deserve to be beaten nearly to death and abandoned along some Godforsaken logging rut? Hell, isn't it enough to say that anybody who abuses anybody joined to him or her in an intimate relationship needs to cut it out?
Update: on some consideration, this passage is not directed at guys to try to get them to stop abusing women. This message is directed at women. Is it encouraging women to abandon abusive relationships---"c'mon, girl, you can do better"?
While you SCREAM at your woman, there's a guy who wants to whisper in her ear . . .
and so forth.
Two thoughts on that:
- There are surely women who provoke their men into batshit-unhinged anger, and who are not meanwhile stealing smiles from other men. There are women who piss off every man they encounter. I can name names.
- "There is a man wishing to make love to her" is not the kind of stuff to be telling a man who is prone to abuse in relationships. Guys who get jealous easily should not be made, err, jealous.
I am not making light of domestic violence. But if eloquent feminists want to draw attention to it and get women and men to post something on their Walls condemning domestic violence, this is not the message.
Isn't it enough to say that men who intimidate the women who are close to them deserve to be beaten nearly to death and abandoned along some Godforsaken logging rut? Hell, isn't it enough to say that anybody who abuses anybody joined to him or her in an intimate relationship needs to cut it out?
Update: on some consideration, this passage is not directed at guys to try to get them to stop abusing women. This message is directed at women. Is it encouraging women to abandon abusive relationships---"c'mon, girl, you can do better"?
20100508
Which rules violated? Rather, how many?
Shooters regularly pass opinions on negligent discharges they hear about in the media. Which of Cooper's Four Rules of firearm safety were violated in such-and-such event? This is no Monday-morning quarterbacking, it's a reminder to gun owners of their responsibilities and the risks they face.
Now that Uncle Radley has drawn widespread attention to the militarization of police, and the excessive use of dynamic entries, by the now-famous video, perhaps it's time for these entries to receive similar scrutiny against a set of rules that allow us to judge (yes, judge: to sit in judgment of, to criticize, to pass opinion on) the actions of police officers.
The acts of police must face scrutiny just as the acts of mayors, presidents, senators, or representatives. They act on our behalf. To those who complain that mere civilians cannot presume to judge the actions of SWAT officers because have not walked in their boots, I call bullshit. If we cannot evaluate the actions of those who claim to serve us, we cannot determine whether they are serving us at all, and we cannot determine whether they are breaking laws themselves. The role of servant and served would be reversed.
To judge their actions, we need a standard. It was Say Uncle or James Rummel (I can't remember) who pointed me to Sir Robert Peel's (or Mayne's) principles of policing.
So, gentle readers: which principles of police conduct were violated in the Columbia raid? For the moment let's convene on Peel's version of the principles.
Note: whether the dad was a dope-dealing scumbag is not relevant. Don't address it. The rules aren't about him.
Now that Uncle Radley has drawn widespread attention to the militarization of police, and the excessive use of dynamic entries, by the now-famous video, perhaps it's time for these entries to receive similar scrutiny against a set of rules that allow us to judge (yes, judge: to sit in judgment of, to criticize, to pass opinion on) the actions of police officers.
The acts of police must face scrutiny just as the acts of mayors, presidents, senators, or representatives. They act on our behalf. To those who complain that mere civilians cannot presume to judge the actions of SWAT officers because have not walked in their boots, I call bullshit. If we cannot evaluate the actions of those who claim to serve us, we cannot determine whether they are serving us at all, and we cannot determine whether they are breaking laws themselves. The role of servant and served would be reversed.
To judge their actions, we need a standard. It was Say Uncle or James Rummel (I can't remember) who pointed me to Sir Robert Peel's (or Mayne's) principles of policing.
So, gentle readers: which principles of police conduct were violated in the Columbia raid? For the moment let's convene on Peel's version of the principles.
Note: whether the dad was a dope-dealing scumbag is not relevant. Don't address it. The rules aren't about him.
20100504
another use for advanced airships
I didn't bother to follow the link on Instapundit this evening about "cellphones for Cuba." My imagination, though, suggested that sending piles of discarded functioning mobile phones to Cuba to encourage freedom wouldn't help the cause if Raoul kept his thumbs tightly on the mobile phone carriers. Florida is a bit too far to give good bars to those phones.
But if Hermanos al Rescate commissioned an airship with cellular equipment aboard, using tight directional antennae---gain---and kept that ship in the air for days at a time, constantly moving but keeping those beams trained on the island, the phones might work in spite of Raoul's jammers.
But I think another country needs internet bandwidth out to the rest of the world a hell of a lot worse than Cuba.
Iran. The airships could run up and down the Iraqi border, and over the Persian Gulf coasts. Sadly the beams would not reach Tehran.
Seems that we should be dropping HF radios into the country so the horror stories can get out and the dissidents can coordinate.
But if Hermanos al Rescate commissioned an airship with cellular equipment aboard, using tight directional antennae---gain---and kept that ship in the air for days at a time, constantly moving but keeping those beams trained on the island, the phones might work in spite of Raoul's jammers.
But I think another country needs internet bandwidth out to the rest of the world a hell of a lot worse than Cuba.
Iran. The airships could run up and down the Iraqi border, and over the Persian Gulf coasts. Sadly the beams would not reach Tehran.
Seems that we should be dropping HF radios into the country so the horror stories can get out and the dissidents can coordinate.
20100430
The Car-Free Month
It's The Cabinet Man again. Long time no post.
We gun nuts are so often accused of being mono-topic drolls, incapable of interests outside of rolling naked in piles freshly reloaded ammunition. But just like most folks, we actually enjoy other pursuits at times. For me, well, I'm a bicycle freak. I yoosta be a USCF flunky and had grand aspirations for racing the RAAM. I once competed in the Eagleman (Half-)Ironman Triathlon as the bicycle leg of a team. My greatest bragging rights, though, lie in my completion of the 4400-mile TransAm Trail that runs from Virginia to Oregon. I rode that solo -- and unsupported -- in 1998. While my ambitions are far tamer than they were a decade ago, I still enjoy throwing a leg over the top tube and grinding out the miles.
(And I'm not the only bicycling gun-nut. Tam and Xavier are two more examples...)
So the Missus and I are gonna' try this whole bicycle-to-work (-grocery store, -gun shop, -porn outlet) for a month. In May.
Why?
Fair question. It'd be easy to say that we're tree-hugging Earth First'ers that want to save the planet and be a good example to Gaia-loving bipeds everywhere. Or that we like making Arab oil shieks pissy! But that'd be 180-proof blatherskype. (Well, maybe there's some truth to that last one...)
In all honesty, we just like riding our bicycles. And we have a couple of them:




(Yes, that's a titanium Litespeed you're drooling over, blessings and praises be upon it...)
I recently picked up the TerraTrike Tour (TTT) tadpole recumbent for me:

and a BOB trailer off Craig's List for the Missus:

(I have an old Rev 1.0 BOB for myself. The Missus doesn't wanna' haul all the groceries...)
So with all that, we wanna' ride!
We plan to use this car-free month as a springboard for developing better ride-to-____ habits. Just as importantly, we're hoping the commitment will result in more pedal time and less waistline. I need to shed about three stones and the last time I decisively lost tonnage was when I was riding religiously for 10+ hours a week. (20+ hours, actually, but we gotta' start some where...)
I'll probably split my time between the TTT and my beloved Cannondale T2000, the latter being my trusty TransAm steed. The TTT is a blast to ride and the very definition of comfortable. It's an imperfect solution, though. It's so low to the ground that I get the wiggins in heavy traffic. It climbs a bit slower than my two-wheelers but the Missus likes that since I don't drop her on the hills. She'll be riding her GT mountain bike that we've fitted with road tires. We'll both be towing the BOBs on grocery day.
There will be some exceptions to "riding everywhere". We have obligations to our local gun club that can't be fulfilled by bicycle. Hauling hundreds of pounds of steel plates under human power is entirely out of the question. As is the 240-mile round trip to The Property. The Missus isn't keen on riding to the base of the Manitou Incline for our weekly summiting, so that's probably an exception as well. But everything else is fair game: work, groceries, dentist and Sportsman's Warehouse.
I'll try to keep the posts coming on our progress and failures. At least once a week. Check back early and often!
TCM
We gun nuts are so often accused of being mono-topic drolls, incapable of interests outside of rolling naked in piles freshly reloaded ammunition. But just like most folks, we actually enjoy other pursuits at times. For me, well, I'm a bicycle freak. I yoosta be a USCF flunky and had grand aspirations for racing the RAAM. I once competed in the Eagleman (Half-)Ironman Triathlon as the bicycle leg of a team. My greatest bragging rights, though, lie in my completion of the 4400-mile TransAm Trail that runs from Virginia to Oregon. I rode that solo -- and unsupported -- in 1998. While my ambitions are far tamer than they were a decade ago, I still enjoy throwing a leg over the top tube and grinding out the miles.
(And I'm not the only bicycling gun-nut. Tam and Xavier are two more examples...)
So the Missus and I are gonna' try this whole bicycle-to-work (-grocery store, -gun shop, -porn outlet) for a month. In May.
Why?
Fair question. It'd be easy to say that we're tree-hugging Earth First'ers that want to save the planet and be a good example to Gaia-loving bipeds everywhere. Or that we like making Arab oil shieks pissy! But that'd be 180-proof blatherskype. (Well, maybe there's some truth to that last one...)
In all honesty, we just like riding our bicycles. And we have a couple of them:




(Yes, that's a titanium Litespeed you're drooling over, blessings and praises be upon it...)
I recently picked up the TerraTrike Tour (TTT) tadpole recumbent for me:

and a BOB trailer off Craig's List for the Missus:

(I have an old Rev 1.0 BOB for myself. The Missus doesn't wanna' haul all the groceries...)
So with all that, we wanna' ride!
We plan to use this car-free month as a springboard for developing better ride-to-____ habits. Just as importantly, we're hoping the commitment will result in more pedal time and less waistline. I need to shed about three stones and the last time I decisively lost tonnage was when I was riding religiously for 10+ hours a week. (20+ hours, actually, but we gotta' start some where...)
I'll probably split my time between the TTT and my beloved Cannondale T2000, the latter being my trusty TransAm steed. The TTT is a blast to ride and the very definition of comfortable. It's an imperfect solution, though. It's so low to the ground that I get the wiggins in heavy traffic. It climbs a bit slower than my two-wheelers but the Missus likes that since I don't drop her on the hills. She'll be riding her GT mountain bike that we've fitted with road tires. We'll both be towing the BOBs on grocery day.
There will be some exceptions to "riding everywhere". We have obligations to our local gun club that can't be fulfilled by bicycle. Hauling hundreds of pounds of steel plates under human power is entirely out of the question. As is the 240-mile round trip to The Property. The Missus isn't keen on riding to the base of the Manitou Incline for our weekly summiting, so that's probably an exception as well. But everything else is fair game: work, groceries, dentist and Sportsman's Warehouse.
I'll try to keep the posts coming on our progress and failures. At least once a week. Check back early and often!
TCM
20100427
No, Mister President,
if you are shopping for a new Supreme Court justice,

Not that Napolitano, but this one.

He's already a judge, if that's important to you. Not particularly important to me, because I believe that already being a judge would disincline one from making waves among other judges. Sorry, that's what the Supreme Court is supposed to do, in a way: point out other judges' errors, even the errors of prior Supreme Court justices. Slaughter Slaughterhouse, anyone?
That's probably why Andrew here so excites as an already-Judge. He's willing to call bullsh on other judges, rather than go along and allow their errors to perpetuate.

Not that Napolitano, but this one.

He's already a judge, if that's important to you. Not particularly important to me, because I believe that already being a judge would disincline one from making waves among other judges. Sorry, that's what the Supreme Court is supposed to do, in a way: point out other judges' errors, even the errors of prior Supreme Court justices. Slaughter Slaughterhouse, anyone?
That's probably why Andrew here so excites as an already-Judge. He's willing to call bullsh on other judges, rather than go along and allow their errors to perpetuate.
Gun pr0n dreamy dreams
First, I always wanted one of these, more than I lusted for a SPAS 12, say. 
The High Standard 10B, a bullpup shotgun. I'm borrowing this photo from a Gunbroker auction, sorry if that offends.
If I were a lunatic independently-wealthy tinkering gunsmith, I'd apply the 10B treatment to a newer semi-auto, and extend that tubular magazine right out to the muzzle. Then I'd package the treatment as a kit for the hobbyist to mount on his own. I don't know enough about modern selfloading shotguns to pick the right one. Bleg?
Meanwhile, on the AR front:
With everybody except me offering a gas-piston AR clone design, the criticisms of the gas piston versus direct gas impingement are emerging, and the most cogent I've heard is this: the direct impingement system applies force exactly along the axis of the bore, breechbolt, and bolt carrier. All are in balance.
A piston offsets that force above the bore axis, causing the bolt carrier to tilt and shave away the soft aluminum of the AR's receiver pieces. A full-auto pistonized AR will grind itself to swarf in one firefight. AKs, in comparison, have rails that guide the bolt carrier and bolt in the needed direction; the offset force harms nothing.
If I were a lunatic independently-wealthy tinkering gunsmith, I'd solve that problem by integrating a steel supporting rail in the roof of the upper receiver. It would take the place of the cocking piece, and probably still function as one. The face of the bolt carrier that takes the force of the gas piston (no longer a "key") would be shaped to ride in that rail, and would not come down out of that rail unless the rail itself were extracted from the upper. The rail would have ample room for lubrication and for the accumulation of chum for the happy soldier to clean away. The bolt carrier would then have little or no surface on it to bear against the inside of the upper receiver---the rail handles all of that. No damage to aluminum receiver.
Whether this configuration would continue to use the existing buffer spring, buffer and buffer tube assembly is still undecided. Maybe the bolt carrier can be carved up to make room for recoil springs that fit within the upper receiver, like on the para FAL?

The High Standard 10B, a bullpup shotgun. I'm borrowing this photo from a Gunbroker auction, sorry if that offends.
If I were a lunatic independently-wealthy tinkering gunsmith, I'd apply the 10B treatment to a newer semi-auto, and extend that tubular magazine right out to the muzzle. Then I'd package the treatment as a kit for the hobbyist to mount on his own. I don't know enough about modern selfloading shotguns to pick the right one. Bleg?
Meanwhile, on the AR front:
With everybody except me offering a gas-piston AR clone design, the criticisms of the gas piston versus direct gas impingement are emerging, and the most cogent I've heard is this: the direct impingement system applies force exactly along the axis of the bore, breechbolt, and bolt carrier. All are in balance.
A piston offsets that force above the bore axis, causing the bolt carrier to tilt and shave away the soft aluminum of the AR's receiver pieces. A full-auto pistonized AR will grind itself to swarf in one firefight. AKs, in comparison, have rails that guide the bolt carrier and bolt in the needed direction; the offset force harms nothing.
If I were a lunatic independently-wealthy tinkering gunsmith, I'd solve that problem by integrating a steel supporting rail in the roof of the upper receiver. It would take the place of the cocking piece, and probably still function as one. The face of the bolt carrier that takes the force of the gas piston (no longer a "key") would be shaped to ride in that rail, and would not come down out of that rail unless the rail itself were extracted from the upper. The rail would have ample room for lubrication and for the accumulation of chum for the happy soldier to clean away. The bolt carrier would then have little or no surface on it to bear against the inside of the upper receiver---the rail handles all of that. No damage to aluminum receiver.
Whether this configuration would continue to use the existing buffer spring, buffer and buffer tube assembly is still undecided. Maybe the bolt carrier can be carved up to make room for recoil springs that fit within the upper receiver, like on the para FAL?
20100426
TENUE CORRECTE EXIGEE
A Yank wearing a NASCAR T-shirt, jeans, and a ballcap should not be surprised to receive poor service in a restaurant that caters to Eurotrash.
You're gonna wait so long for your dessert that you'll have to go to the maitre d' to remind the establishment that you ordered it.
Just sayin'.
You're gonna wait so long for your dessert that you'll have to go to the maitre d' to remind the establishment that you ordered it.
Just sayin'.
20100404
Oh, socialism, where is thy sting?
To paraphrase Dr Henry Jones, it wasn't until my oldest kid reached the age of 13 that they became interesting.
So over Easter dinner Firstborn, Mlle Sklodovska, Barbaloot and I compared the concepts of nationalism, Nazism (national socialism), and fascism.
There is no sting to equating ObamaCare (probably better called Reid/PelosiCare) with socialism. The word 'socialism' does not invoke the outrage, the indignation, that it once did when I was a boy.
Libertarians: don't bother. It won't get you traction with anyone whose help you'd welcome. You are surrounded by people who hope to start collecting wealth redistribution, via Social Security, sooner than you'll pay off your current car loan. The only outrage they will exhibit is if Sosh Scurty is depleted before they get theirs; by then it will be too late. Cries of 'socialism' today won't motivate them.
Besides, it isn't quite true. ObamaCare (SoetoroCare?) is not socialism, it's fascism.
Something the reader will have to look up. Next up, regulatory capture.
So over Easter dinner Firstborn, Mlle Sklodovska, Barbaloot and I compared the concepts of nationalism, Nazism (national socialism), and fascism.
There is no sting to equating ObamaCare (probably better called Reid/PelosiCare) with socialism. The word 'socialism' does not invoke the outrage, the indignation, that it once did when I was a boy.
Libertarians: don't bother. It won't get you traction with anyone whose help you'd welcome. You are surrounded by people who hope to start collecting wealth redistribution, via Social Security, sooner than you'll pay off your current car loan. The only outrage they will exhibit is if Sosh Scurty is depleted before they get theirs; by then it will be too late. Cries of 'socialism' today won't motivate them.
Besides, it isn't quite true. ObamaCare (SoetoroCare?) is not socialism, it's fascism.
Something the reader will have to look up. Next up, regulatory capture.
20100403
the matriarchy is oppressing me again (some (more) editing)
This in a comment at drhelen's, on a now famous post about how controlling pornography is an attempt to control men's sexuality.
Let me ask, "huh?" If you get out what you put in, regardless of what the other person of the two of you put in, what is the point of having the other person?
If it takes two people for a marriage to work (and assuming a he and a she in it), he will definitely not get out whatever he put in it, he will get out only what she put in. In the long run, she will not invest more than he does, nor he more than she did; but VB didn't say that. Would have been helpful if VB had.
What would it take, from the standpoint of a talented aphorist, to get these two proverbs to work together, in describing the effort to keep a marriage?
FWIW, drhelen and many of her commenters are conjecturing that the author of the article under scrutiny is a feminist harridan who froze her poor hubby out. That has a ring of truth to it, in a way that cuts very close to my own experience from 25 or so years ago.
Dr Anonymous, the article's author, seems to have taken an easy way to dismiss a serious problem, that He was addicted to Porn!, just as easy for drhelen's commenters to reply that Dr Anonymous was Frigid.
The truth is somewhere in between, I would guess, and really hinges on how well Dr Anonymous and Porn Addicted Husband communicated before she took on Frigid properties and he took on porn addict properties. It could have been averted.
It takes TWO people for a marriage to work. You will only get out whatever effort you put in.
Let me ask, "huh?" If you get out what you put in, regardless of what the other person of the two of you put in, what is the point of having the other person?
If it takes two people for a marriage to work (and assuming a he and a she in it), he will definitely not get out whatever he put in it, he will get out only what she put in. In the long run, she will not invest more than he does, nor he more than she did; but VB didn't say that. Would have been helpful if VB had.
What would it take, from the standpoint of a talented aphorist, to get these two proverbs to work together, in describing the effort to keep a marriage?
FWIW, drhelen and many of her commenters are conjecturing that the author of the article under scrutiny is a feminist harridan who froze her poor hubby out. That has a ring of truth to it, in a way that cuts very close to my own experience from 25 or so years ago.
Dr Anonymous, the article's author, seems to have taken an easy way to dismiss a serious problem, that He was addicted to Porn!, just as easy for drhelen's commenters to reply that Dr Anonymous was Frigid.
The truth is somewhere in between, I would guess, and really hinges on how well Dr Anonymous and Porn Addicted Husband communicated before she took on Frigid properties and he took on porn addict properties. It could have been averted.
Subscribe to:
Posts (Atom)
